heronrake89

Door Handle Replacement Door handles seem like an insignificant thing however, if you don't like the appearance of the handles or find them difficult to use and use, you should consider replacing them. With a little patience, you can get the new handle in no time. Modern door handles are equipped with cover plates that conceal the screws to create a stylish appearance. If your new handle does not already have them connected, you'll have to attach them separately. Take off the handle from the old one. Door handles are not only essential for aesthetics of your home but they're also essential for security as they allow you to lock and unlock your door. However, as time passes the door handle could lose its grip, feel loose, or appear old and worn. This is a good indication that it's time to replace the door handle. If your door handle is becoming difficult to use, it could be time to replace it. This is an issue because it means that you can no longer lock or unlock your door, which could create a security risk for you and your family. Another reason to replace the door handle is if it's damaged or broken. A damaged or broken door handle can be quite dangerous, especially when your children or elderly family members struggle to open it, and get trapped within. It's simple to replace a broken handle on doors. Most modern door handles are a standard size, so they are suitable for any door. If you aren't sure if the new door handle you are buying will work, remove the old one and measure its housing holes. This will help you to buy the correct sized door handle. It is easiest to remove the old door handle by taking it off from the door. Usually, a screwdriver is used. However, some door handles have a cover plate that conceals the screws that mount them, so you'll have to cut off this to access the screws underneath. Once you've removed your old handle, make a note of how the spindle is positioned to ensure you are able to make sure it is aligned when you put in your new one. You can also remove the door handle by depressing the latch mechanism. You can use a screwdriver for removing the door handle. However, you'll have to locate the small latch which is located on the edge trim piece. After taking off the latch, remove the handle and the strike plate. Then, remove the latch from the edge of the door. Removing the Strike Plate When you replace your handle, you'll also want to replace the latch plate that holds the hole that the door's latch hooks into when it closes. The new handles will come with two latch plates: a rectangular and circular plate (see the diagram above that shows the parts of the door handle). If you have a rectangular latch plate, replace it with a round one. This will let the latch hook into the strike plate, making the handle more convenient. The first step is to unhook the screw holding the latch plate. The screws can be very tight, and may require some force to loosen. If you can, it might be helpful to have another person assist with this part. The latch plate should come out of the door after the screws have been removed. If it is stuck or doesn't move, use a small nail file to scrape around the edges of the latch plate. This can sometimes free up the plate. Now you can prepare the new strike plate to be installed. Screw the latch plate into the doorjamb using the wood screws that came with your new handles. Don't over tighten your screws because this could damage the strike plate. If you're unsure if the latch plate is in the correct position Try closing and then opening the door to see whether it locks and closes correctly. If not, you'll need to adjust the strike plate upwards or down, or forward or back until the door shuts and latches correctly. If the door is moving or jiggling, you may need to increase the size of the hole for the latch in the strike plate. This is more prevalent with older doors, but could be due to wear and tear hinge mortises that are not deep enough or not the right size for the latch, or due to damaged or broken strike plate that is damaged or broken. If this is the case, follow the exact procedure for adjusting the strike plate, but with the use of a metal file instead the hammer and chisel. Take off the Latch The latch is the angled piece of metal that is able to move through the hole on the inside edge of your door. The latch moves forward when you turn the handle. It also connects to a hole in the door frame to keep the door closed. If your door wobbles when you close it, replacing the latch could be all that is needed to fix the problem. The screws that hold the door latch are hard to spot however, you can put a screwdriver in a small hole in the trim plate, and then pull the latch off. After taking off the trim plate you will be able to pull off the latch and the bolts that hold it in place and the spindle in position. If the latch isn't easily removed then use a paperclip tool to remove it from the handle mechanism. Insert the item into the recessed latch slot and then gently twist or jiggle until you feel the handle and latch begin to separate. You may need to repeat this process several times before you are able to take the latch off. You should be able slide the new latch into its slot with no issues once you have removed the old one. Make sure the latch is correctly positioned in the slot and is aligned with the screw chambers, and then use the new screws to fasten it to the strike plate and door frame. Before installing the new handle, be sure to measure your existing backset (the distance from the center of the large hole on the front surface of the door to the edge). Verify that the size of the latch of the new handle is in line with the measurement. You'll require a new lock cylinder if you're replacing the handle and latch, or your old one is damaged. If you're not replacing the locks however, a new latch will fit in your existing recess, and work just fine with your current keys. Be sure to select an entry point with rectangular cover plates that match your handles. Removing the Cover Plate You can replace your door handles with a new rose and lever designs to enhance the appearance of your house. You can buy complete sets that include matching escutcheons as well as privacy adaptor kits. The first step in replacing the door handle inside is to remove the cover plate or rose, which conceals the screws and inner mechanism. Utilize a flathead to take off the plate. It may have an opening along one side or be held in place by a pin. Remove the screw that is holding the handle inside and set it aside once the cover plate has been removed. It is also necessary to remove the screws that are holding the latch and the plates inside, which you can do by loosening them with the help of a Philips screwdriver. Then, take the inner plates and latch plate from the door and put them aside. Some doors don't have this gap. If yours isn't allow for a handle, you'll have to drill a new hole into the door. This is the same process as opening a locked door however you'll have to be extra careful not to harm the frame or door. The installation of new door knob screws is necessary after the holes have been made. Be sure to purchase the same size as the previous ones, so you do not end up with a handle that's too tight or too loose. You'll also have to install an additional latch plate and strike rod that aren't included in the majority of door handle sets. If you're in search of a reliable replacement interior door handle set Try the Amazon's Choice FAERSI two-piece chrome-finished handle set. It's factory-fitted and has received hundreds five-star reviews. It's an excellent option for replacing worn out or damaged interior door hardware on your Chevy.